50/125μm OM3 Fiber MTP Fanout Cable 1x12 Fiber MTP to 12 LC

50/125μm OM3 Fiber MTP Fanout Cable 1x12 Fiber MTP to 12 LC

Shortly Description:

Features and Applications:

• For transition from trunk backbone assemblies to fiber rack system;
• MPO/MTP on one end, with single-fiber connectors on another end;
• MPO/MTP connector in 8 or 12-fiber interface for choices;
• Fiber counts available in 8 / 12-fibers;
• Single-fiber connector interface available in FC, SC, ST, LC, MTRJ, E2000 informs of Simplex or Duplex channeling;
• Customized furcation length to cater for different installation situations;
• Ruggedized furcation legs: Round fanout kit with 2.0 mm or 3.0 mm legs to single-fiber connectors.

MTP brand cable assemblies are multi-fiber patch cords suitable for high-density back plane and PCB solutions. MTP brand patch cords offer up to 36 times the density (based on a 72 fiber ferrule) of traditional patch cords, providing significant space and cost savings. There are several configurations for MTP brand cable assemblies. The most popular is a MTP brand connector to MTP brand connector patch or trunk cable that connects an MTP brand cassette to another MTP brand cassette. If an MTP brand adapter panel is installed in a patch panel, then an MTP brand cable to MTP brand can be used as well. Another configuration is MTP brand connectors to LC or SC fiber connector. These can be used in different applications for both back end and front end adapter panels, for instance, plug one MTP brand connector into the back and plug an MTP brand cable to LC cable into the front and have the 12 LC connections go to other equipment. If there is an MTP brand cassette that needs to be lit up by using a 12-fiber LC adapter panel, plug each of the 12 LC connections in the LC adapter panel. The MTP brand side then plugs into the back of the cassette. Increase the transfer speed with 10Gig 50 Micron multimode cable or increase the distance the signal can travel using singlemode. Cables may be constructed of ribbon fiber, small form factor loose tube assembly cable, or subgrouped trunking cable. The options are only limited by the application.

Cable Structure Illustration:

Cable Physical Specifications:

Contact Us as following details:

Above performance refers to FOCC standard grade performance, flexible specification is available to fit for different installation needs, please contact our professional sales team for details will be info@fiberopticshow.com or call us directly 0086-755 86583530.